RE: [CAD_CAM_EDM_DRO] OT- Amperage or Current ?

Wouldn't it be an "openage"?

Andy Wander
Verrex Corporation


-----Original Message-----
From: turbulatordude [mailto:dave_mucha@...]
Sent: Thursday, January 27, 2005 10:07 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Capacitor size? Amperage or Current
?



--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<dave_mucha@y...> wrote:

>
>
> >
> > Also, could I make a request on behalf of the more pedantic of us?
> > There is no such term as amperage; the correct term is current.
> >
> > /// Andre Marie Ampere might argue this point. :-) Sitting on

the

> sidelines of this power supply debate, the pedantic group looks
> rather small..kidding
> >
> > Ron
>
>
> I thought Current was the flow THRU the thing and Amps were the

unit

> if measurement ?
>
> But, Current is dyanmaic, flowing, moving. Amperage (to me at

least)

> is a rating.
>
> My motors have FLA ratings. My Fuses do was well.
>
> But, we are not all up on the lingo for all things. I may be bush
> league and use amperage to describe the rating or engineering, but
> current to describe the actual measured flow. (that is if current

is

> a particle and not a wave)
>
> Dave

op's should have mentioned that when testing, you need to make sure
the ohmage is in the right range and look out for any shortages or
open circuits.

Dave






Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links