Re: [CAD_CAM_EDM_DRO] narrow timing belts
Posted by
josef wagner
on 2005-01-29 09:02:08 UTC
hallo graham
yes that's true
the problem is the dimensional stability
conti has a catalogue for smallest pitch 3mm
and with 6, 9, 15 and 20 mm on page 10
link:
http://www.contitech.de/ct/contitech/themen/produkte/antriebsriemen/industrie/docs/synchroforce_cxaIII_cxp_III_d_e.pdf
best regards from vienna
josef
+++
yes that's true
the problem is the dimensional stability
conti has a catalogue for smallest pitch 3mm
and with 6, 9, 15 and 20 mm on page 10
link:
http://www.contitech.de/ct/contitech/themen/produkte/antriebsriemen/industrie/docs/synchroforce_cxaIII_cxp_III_d_e.pdf
best regards from vienna
josef
+++
----- Original Message -----
From: "Graham Stabler" <eexgs@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, January 29, 2005 4:32 PM
Subject: [CAD_CAM_EDM_DRO] narrow timing belts
Discussion Thread
Graham Stabler
2005-01-29 07:33:27 UTC
narrow timing belts
turbulatordude
2005-01-29 07:48:25 UTC
Re: narrow timing belts
josef wagner
2005-01-29 09:02:08 UTC
Re: [CAD_CAM_EDM_DRO] narrow timing belts
josef wagner
2005-01-29 09:11:00 UTC
Re: [CAD_CAM_EDM_DRO] narrow timing belts
Graham Stabler
2005-01-29 11:25:57 UTC
Re: narrow timing belts- and old plotter conversion
Graham Stabler
2005-01-29 11:30:41 UTC
Re: narrow timing belts- and old plotter conversion
JanRwl@A...
2005-01-29 14:08:11 UTC
Re: [CAD_CAM_EDM_DRO] narrow timing belts