Re: [CAD_CAM_EDM_DRO] narrow timing belts
Posted by
josef wagner
on 2005-01-29 09:11:00 UTC
i have just found really a much smaller one
pitch 2,032 mm
width 3,18 mm
type MXL
obiously and inch dimension
link
http://www.contitech.de/ct/contitech/themen/produkte/antriebsriemen/industrie/docs/synchrobelt_trapez_d.pdf
josef
+++
pitch 2,032 mm
width 3,18 mm
type MXL
obiously and inch dimension
link
http://www.contitech.de/ct/contitech/themen/produkte/antriebsriemen/industrie/docs/synchrobelt_trapez_d.pdf
josef
+++
----- Original Message -----
From: "Graham Stabler" <eexgs@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, January 29, 2005 4:32 PM
Subject: [CAD_CAM_EDM_DRO] narrow timing belts
Discussion Thread
Graham Stabler
2005-01-29 07:33:27 UTC
narrow timing belts
turbulatordude
2005-01-29 07:48:25 UTC
Re: narrow timing belts
josef wagner
2005-01-29 09:02:08 UTC
Re: [CAD_CAM_EDM_DRO] narrow timing belts
josef wagner
2005-01-29 09:11:00 UTC
Re: [CAD_CAM_EDM_DRO] narrow timing belts
Graham Stabler
2005-01-29 11:25:57 UTC
Re: narrow timing belts- and old plotter conversion
Graham Stabler
2005-01-29 11:30:41 UTC
Re: narrow timing belts- and old plotter conversion
JanRwl@A...
2005-01-29 14:08:11 UTC
Re: [CAD_CAM_EDM_DRO] narrow timing belts