Help from electronic guru's
Posted by
Robert
on 2000-05-26 08:04:07 UTC
I have several motor driver sets salvaged from copiers. I am trying to find
out if they ( or some part of ) can be suitable to drive router or
flamecutter table. There are several types: BLDC, brushed types like from
old line printers. I have boxes of steppers, but most are too small. I am
compiling several webpages with the information. The first one completed is
at http://members.fortunecity.com/cncrouter/bldc.html
It is about 2 types of BLDC with drivers. I will be building more on the DC
motor driver sets along with a page full of stepper and dc images today.
Robert Ash
out if they ( or some part of ) can be suitable to drive router or
flamecutter table. There are several types: BLDC, brushed types like from
old line printers. I have boxes of steppers, but most are too small. I am
compiling several webpages with the information. The first one completed is
at http://members.fortunecity.com/cncrouter/bldc.html
It is about 2 types of BLDC with drivers. I will be building more on the DC
motor driver sets along with a page full of stepper and dc images today.
Robert Ash