CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: bridgeport quill screww

Posted by Zafar Salam
on 2005-02-06 03:39:52 UTC
Hi,

Forgot to ask. What size motor would be suitable. What's the typical torque
of steppers used for the quill.

Zafar

----- Original Message -----
From: "John Delaney" <jdelaney2@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, February 06, 2005 7:41 AM
Subject: [CAD_CAM_EDM_DRO] Re: bridgeport quill screww


>
>
> > > A question for bridgeport retrofitters. What size
> > > ball screw is suitable for the bridgeport quill.
>
> >From what I've seen around it looks like people are using 1/2" or
> 5/8" with preloaded nuts. I am using the same screw as my table which
> is huge for the need. But.....I wanted adjustable nuts and all I
> could find anyway were screws that were 1" or bigger with adjustable
> nuts. I am about 25% into the quill drive construction. <IMHO>
> the "best" quill drive I've seen is at Elrod Machine. Anilam's looks
> good too. Check out Jon Elson's site too for a good home brew.
>
> The real secret it appears, is to get the screw as close to the quill
> as possible. 'Course you can't use a really tiny screw either,
> that'll flex. Trade offs, trade offs, trade offs..........
>
> My nickel.
>
> -jd
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>

Discussion Thread

Zafar Salam 2005-02-05 06:49:34 UTC bridgeport quill screww Daniel T. Medlin 2005-02-05 13:34:59 UTC Re: [CAD_CAM_EDM_DRO] bridgeport quill screww Ron Kline 2005-02-05 16:27:35 UTC Re: [CAD_CAM_EDM_DRO] bridgeport quill screww Jon Elson 2005-02-05 17:34:56 UTC Re: [CAD_CAM_EDM_DRO] bridgeport quill screww John Delaney 2005-02-05 18:42:06 UTC Re: bridgeport quill screww JanRwl@A... 2005-02-05 19:39:25 UTC Re: [CAD_CAM_EDM_DRO] bridgeport quill screww Zafar Salam 2005-02-06 03:32:18 UTC Re: [CAD_CAM_EDM_DRO] bridgeport quill screww Zafar Salam 2005-02-06 03:39:52 UTC Re: [CAD_CAM_EDM_DRO] Re: bridgeport quill screww