Re: [CAD_CAM_EDM_DRO] rutex R991h

Hi Todd

Galil makes a chip that does this, but they are not cheap. About $100 each
and you still need to a few more components and a board. I can attest to
the fact that they work very well. I have been using them along with
CNCPRO for many years on a 4-axis mill.

Bob

----- Original Message -----
From: "procisionengineering" <procisionengineering@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, February 14, 2005 5:48 AM
Subject: [CAD_CAM_EDM_DRO] rutex R991h


>
>
> Anyone know of another company that makes something similar to the
> R991h made by Rutex?
>
> It takes step and direction inputs and outputs and outputs a servo 0-
> 10v +/- (accepts quad encoder input I believe).
>
> Thanks!
> Todd
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>