RE: [CAD_CAM_EDM_DRO] How do I check the MOSFET's in my stepper d river
Posted by
Andy Wander
on 2005-02-23 05:07:54 UTC
Jeff:
You did buy more than one fuse, right?
I'd be tempted to just try it, and if it blows again, then I'd get into
checking out the MOSFETS. (especially since I, as you, don't know how to
check them without unsoldering them).
Andy Wander
Verrex Corporation
-----Original Message-----
From: washcomp [mailto:jeff@...]
Sent: Wednesday, February 23, 2005 7:16 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] How do I check the MOSFET's in my stepper
driver
I blew a fuse in my API CMD-260 stepper driver. Before I put it back
into my CNC mill, I'd like to make sure that one of the MOSFET's
didn't blow and cause the fuse to go. How would I test them without
de-soldering? (I didn't find any consistancy in resistances with my
ohm meter, probably because of external circuitry or interconnection
between them). There are ten of them in there.
Or should I just change the fuse and hope for the best?
Jeff
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
You did buy more than one fuse, right?
I'd be tempted to just try it, and if it blows again, then I'd get into
checking out the MOSFETS. (especially since I, as you, don't know how to
check them without unsoldering them).
Andy Wander
Verrex Corporation
-----Original Message-----
From: washcomp [mailto:jeff@...]
Sent: Wednesday, February 23, 2005 7:16 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] How do I check the MOSFET's in my stepper
driver
I blew a fuse in my API CMD-260 stepper driver. Before I put it back
into my CNC mill, I'd like to make sure that one of the MOSFET's
didn't blow and cause the fuse to go. How would I test them without
de-soldering? (I didn't find any consistancy in resistances with my
ohm meter, probably because of external circuitry or interconnection
between them). There are ten of them in there.
Or should I just change the fuse and hope for the best?
Jeff
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
Andy Wander
2005-02-23 05:07:54 UTC
RE: [CAD_CAM_EDM_DRO] How do I check the MOSFET's in my stepper d river