CAD CAM EDM DRO - Yahoo Group Archive

Re: How do I check the MOSFET's in my stepper driver

Posted by washcomp
on 2005-02-23 05:08:25 UTC
The weird thing is, I really haven't done anything to blow the fuse.
The machine has been powered up, but I've been working on a
completely different section (VFD/Power end) and the motor was just
sitting there for a few weeks. Went to test the new setup and the Z
axis didn't work.

Fuse is an opaque ceramic Littlefuse Pico fuse.

The thing that ticks me off is I have an in-line 8amp fuse and the
internal one was a 10amp. The internal one was a fast-blow, I'll
have to check what I used for the in-line and make sure it's the same
or faster I guess?

I thought that for this application, a slower fuse would have made
sense for the internal one to allow current in-rush, but maybe that's
not the case with a stepper driver?

Jeff

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "r_.hampson@t..."
<r_.hampson@t...> wrote:
>
> Did you blow the fuse or did the fuse blow!!
>
> If you caused a short circuit and blew the fuse it is possible that
you
> have damaged one of the transistors (fet), but it is also possible
that the
> fuse wire got tired and just could not take it any more and simply
gave up,
> in which case replace it and continue.
>
> Examin the fuse if it is glass body if the fuse wire has been totaly
> vaperoised look for further faults if it is still there but broken
replac
> it and continue.
>
> roger
>
>
> Original Message:
> -----------------
> From: washcomp jeff@w...
> Date: Wed, 23 Feb 2005 12:15:59 -0000
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] How do I check the MOSFET's in my
stepper driver
>
>
>
>
> I blew a fuse in my API CMD-260 stepper driver. Before I put it
back
> into my CNC mill, I'd like to make sure that one of the MOSFET's
> didn't blow and cause the fuse to go. How would I test them
without
> de-soldering? (I didn't find any consistancy in resistances with
my
> ohm meter, probably because of external circuitry or
interconnection
> between them). There are ten of them in there.
>
> Or should I just change the fuse and hope for the best?
>
> Jeff
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> timg@k...
> Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to
be a
> sister site to the CCED group, as many of the same members are
there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .

Discussion Thread

washcomp 2005-02-23 04:17:16 UTC How do I check the MOSFET's in my stepper driver r_.hampson@t... 2005-02-23 04:40:37 UTC RE: [CAD_CAM_EDM_DRO] How do I check the MOSFET's in my stepper driver washcomp 2005-02-23 05:08:25 UTC Re: How do I check the MOSFET's in my stepper driver turbulatordude 2005-02-23 05:10:16 UTC Re: How do I check the MOSFET's in my stepper driver art 2005-02-23 05:46:59 UTC Re: [CAD_CAM_EDM_DRO] Re: How do I check the MOSFET's in my stepper driver Les Newell 2005-02-23 06:13:37 UTC Re: [CAD_CAM_EDM_DRO] Re: How do I check the MOSFET's in my stepper driver Jon Elson 2005-02-23 09:15:59 UTC Re: [CAD_CAM_EDM_DRO] How do I check the MOSFET's in my stepper driver Jon Elson 2005-02-23 09:21:32 UTC Re: [CAD_CAM_EDM_DRO] Re: How do I check the MOSFET's in my stepper driver m0nkey0ne 2005-02-23 09:32:14 UTC Re: How do I check the MOSFET's in my stepper driver washcomp 2005-02-23 09:34:37 UTC Re: How do I check the MOSFET's in my stepper driver Mariss Freimanis 2005-02-23 11:05:14 UTC Re: How do I check the MOSFET's in my stepper driver Roger Hampson 2005-02-23 11:15:23 UTC RE: [CAD_CAM_EDM_DRO] Re: How do I check the MOSFET's in my stepper driver washcomp 2005-02-23 15:04:16 UTC Re: How do I check the MOSFET's in my stepper driver Jon Elson 2005-02-23 17:43:47 UTC Re: [CAD_CAM_EDM_DRO] Re: How do I check the MOSFET's in my stepper driver Jon Elson 2005-02-23 17:49:00 UTC Re: [CAD_CAM_EDM_DRO] Re: How do I check the MOSFET's in my stepper driver Andrew Mawson 2005-02-24 10:14:25 UTC Re: How do I check the MOSFET's in my stepper driver Mariss Freimanis 2005-02-24 11:07:34 UTC Re: How do I check the MOSFET's in my stepper driver