CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT

Posted by Earl White
on 2005-03-08 21:44:49 UTC
Dear Les,

That makes sense. So the DRO only function is sort of obsolete. Do you still
use an edgefinder or is that obsolete too. It seems like this step is
critical??

Thanks

Earl White

eewhite4@...
----- Original Message -----
From: "Les Newell" <lesnewell@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, March 06, 2005 2:46 AM
Subject: Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the
question! OT


>
> After you have used the mill in CNC mode for a while you will probably
> not want to use manual mode much. It is a slightly different way of
> working but once you get used to it, it is a lot faster.
>
> Think of CNC as a DRO with a super power feed and automatic end stops.
> Mach3 is great for this sort of work. The MPG function (manual pulse
> generator) gives you one or more electronic handwheels. You can't 'feel'
> the cut with an electronic wheel but apart from that MPGs can be set up
> to behave in a very similar way to manual wheels.
>
> Here is an example of how I would drill a hole at specific coordinates
> on a one-off job:
>
> Zero the DROs at the datum point using the MPG to jog (move) the table.
> Go into MDI (manual data input) mode and enter G0 Xxxx Yyyy (where xxx
> and yyy are the coordinates). The machine goes to the coordinates. Now I
> can use the MPG do drill the hole like a manual machine or use a drill
> cycle if I can be bothered. No counting handwheel turns, compensating
> for backlash etc, the machine takes care of all that.
>
> Les
>
> >Question- Does the conversion to CNC preclude the manual use of the
> >milling machine?
> >
> >Thanks in advance
> >
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Discussion Thread

R Rogers 2005-03-05 15:00:27 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT Les Newell 2005-03-06 00:45:58 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT Earl White 2005-03-08 21:14:08 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT Earl White 2005-03-08 21:44:49 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT Les Newell 2005-03-09 01:30:11 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT R Rogers 2005-03-09 04:27:06 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT Jon Elson 2005-03-09 10:24:25 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT Tom Hubin 2005-11-03 13:44:17 UTC Re: [CAD_CAM_EDM_DRO] To Convert or not to convert- That is the question! OT