CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] vacuum hold down

Posted by Dave Fisher
on 2005-03-10 02:07:45 UTC
We built a vacuum table with great success
I have put some details on

www.distel.co.uk/vac_table.htm

Rgds

Dave Fisher




-----Original Message-----
From: hattrick322000 [mailto:Hattrick@...]
Sent: 10 March 2005 05:38
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] vacuum hold down




I'm thinking of adding vacuum hold down to my 4'x4' router. I would like
to use a shop vac as this is low budget operation! My current thought is to
place some small 1/4" or so thick strips of wood on top of my table. Level
these off with the router and than place a sheet of Polycarbonate over these
strips and drill the appropriate holes to hold down the work. Most of the
work I do is cut through stuff and I don't want to chew up my vacuum table
surface. Is there something that will let the vacuum through that I can
sacrafice? Or just replace the polycarbonate as needed? Or put on a piece
of sacraficial wood on top of the polycarbonate and drill hole through this
as well to get the vacuum where I need it?

Pretty new to this stuff! So any help is appreciated!








Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

hattrick322000 2005-03-10 00:22:40 UTC vacuum hold down Dave Fisher 2005-03-10 02:07:45 UTC RE: [CAD_CAM_EDM_DRO] vacuum hold down Mark 2005-03-10 04:43:59 UTC Re: vacuum hold down Ron Ginger 2005-03-10 06:10:04 UTC Re: vacuum hold down Neil Gillies 2005-03-10 15:07:45 UTC RE: vacuum hold down Dave Fisher 2005-03-10 16:06:55 UTC RE: [CAD_CAM_EDM_DRO] Re: vacuum hold down Dave Fisher 2005-03-10 16:10:03 UTC RE: [CAD_CAM_EDM_DRO] Re: vacuum hold down