Re: [CAD_CAM_EDM_DRO] Spindle

Bill,

If you are milling aluminum, the higher speed is OK.

I use both a Porter Cable 3.25 HP router and a Bosch 2HP router. Both are
variable speed.

Bob Campbell

----- Original Message -----
From: William Scalione <scalione@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@egroups.com>
Sent: Tuesday, June 06, 2000 4:39 PM
Subject: [CAD_CAM_EDM_DRO] Spindle


> Anyone know of a company that makes small milling machine head or
> spindle that is sold by itself?
> I have a CNC router and I would ocassionally like to swap spindles since
> the router turns about
> 25,000 rpm. This would allow me to do some light milling with my
> machine. A $3000.00 Colombo
> spindle is not an option. Something in the line of a couple hundred
> bucks is what I was thinking.
>
>
> Thanks
> Bill
>
> ------------------------------------------------------------------------
> Old school buds here:
> http://click.egroups.com/1/4057/3/_/423600/_/960327475/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager