Re: [CAD_CAM_EDM_DRO] E-stop Problem + more

1.]YOUR SERVO TO GO CARD READS 4000PPR BECAUSE THE CAR IS SET FOR 4X
WHEREBY THE PPR IS INCREASED 4 TIMES. YOU HAVE AN OPTION TO SWITCH DOWN TO
2X or 1X. YOU WOULD THEN LOOSE SOME OF YOUR RESOLUTION AND SMOOTHNESS
2.]YOUR MOTOR IS MOVING AT '0' SPEED BECAUSE THER MUST BE SOME OFFSET AT
THE OUTPUT OF THE DAC OR THE INPUT OFFSET OF THE DRIVE IS HIGH. YOU NEED TO
ADJUST 'OFFSET' or 'BALANCE POT'

REGARDS

BYRON DAMANIA