Re: [CAD_CAM_EDM_DRO] Subject: Re: rack & pinion
Posted by
Dave Smith
on 2005-03-30 22:44:36 UTC
Thanks lam & everyone,
I got hold of AllGears and they will cut any size & shape / module / material, I need so my problem is solved.
thanks for all those replies
Dave Smith
Cape Town
South Africa
I got hold of AllGears and they will cut any size & shape / module / material, I need so my problem is solved.
thanks for all those replies
Dave Smith
Cape Town
South Africa
----- Original Message -----
From: Lam
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Thursday, March 31, 2005 3:22 AM
Subject: [CAD_CAM_EDM_DRO] Subject: Re: rack & pinion
>Message: 12
> Date: Wed, 30 Mar 2005 08:24:38 +0200
> From: "Dave Smith" <dave@...>
>Subject: Re: rack & pinion
>
>thanks Marcus
>
>I would make them myself but to get the gear cutter (0.5 - 1 module) is a
>problem. They r always ex Japan or ex Germany which takes weeks. (bear in
>mind I live in South Africa)
>
>I was hoping to purchase a set and have it within a day or two.
>
>regards
>
>Dave Smith
>Cape Town
>South Africa
>
Hi Dave
I have not tried it ....
But think you could make and use a "single point" tool
something like the sherline gear cutter ?
http://www.sherline.com/3217pg.htm
Lam
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Discussion Thread
Stephan Kotze
2005-03-30 03:54:27 UTC
Subject: Re: rack & pinion
Dave Smith
2005-03-30 04:37:50 UTC
Re: [CAD_CAM_EDM_DRO] Subject: Re: rack & pinion
Lam
2005-03-30 17:24:23 UTC
Subject: Re: rack & pinion
Dave Smith
2005-03-30 22:44:36 UTC
Re: [CAD_CAM_EDM_DRO] Subject: Re: rack & pinion