CAD CAM EDM DRO - Yahoo Group Archive

Re: What would you do !

on 2005-04-28 17:51:46 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Brian" <ka1bbg@w...> wrote:
> Hi, go over to one of the guys selling used video equipment or one
of the
> photo groups, i have several cameras and got info from one of the
used
> dealers. if they dont have it usually they know who does have info.
cul
> brian f.


Persistance and patience will pay off.

There has to be someone who knows the things and has the data.

Dave





> ----- Original Message -----
> From: "Greg McCreight" <gregmc@w...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Thursday, April 28, 2005 8:04 PM
> Subject: [CAD_CAM_EDM_DRO] What would you do !
>
>
> > Decision time I have a step motor controlled video cmm made by
Nikon
> they dont want to talk to me
> > its two old, bought cheap, but 10
years ago it
> was 100 grand ! It was bought missing
> > most cables the measurement computer
is ok and
> will measure the object on the
> > field of view. No cables for stepper
motors or
> joystick or dro. Is there a way to make
> > cables up with no info avail on
origionals ?
> 8 or 10 required. I dont see this getting
> > done ! Any one have a ideal for
stand alone
> 4 axis control with joystick under $$$ a
> > fortune. Or maybe a low cost 4 axis
cnc
> controller with software that could be used
> > as the Dro also . small motors
around 50
> oz/in size 23 would be about right , So in
> > a perfect world I need a 4 axis
contoller (
> focus,zoom, x,y stage) DRO, and jog
> > pendant or joystick any ideals !
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >

Discussion Thread

Greg McCreight 2005-04-28 17:05:00 UTC What would you do ! Brian 2005-04-28 17:41:10 UTC Re: [CAD_CAM_EDM_DRO] What would you do ! turbulatordude 2005-04-28 17:51:46 UTC Re: What would you do ! Greg McCreight 2005-04-28 17:55:21 UTC Re: [CAD_CAM_EDM_DRO] What would you do !