RE: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Posted by
Dhiren Shah
on 2005-05-06 13:15:49 UTC
Hello Jim,
Corel does not export M&G codes as part of the package. We designed a 32 bit
driver.
You design your job.
Make sure you have selected hairlines.
Click Print from the File menu.
Select our driver as your selected output device.
Save file.
It will generate F commands.
You are allowed to insert M codes of your choice at various points such as,
Job start
Starting of a shape
Ending of a shape
Ending of a job
Etc.
To test, we wrote 10 lines of text with different TrueType fonts and
different sizes and crated G-code files. It was quote a large file but a
good test.
Currently, we have tested the driver with,
Corel Draw versions 9, 10, 11, and 12.
AutoCAD version 12 and up
CadLink's EngraveLab version 6 and higher
In the next few weeks, we will be testing the driver with Dolphin PartMaster
and SolidWorks.
Dhiren Shah, Dir., Operations
Solustan, Inc.
165 Chestnut St., #200, Needham, MA 02492
PH: 781-449-7666 FAX: 781-449-7759
WWW.SOLUSTAN.COM
WWW.LINKMOTION.COM
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com]On Behalf Of jymmm
Sent: Thursday, May 05, 2005 3:47 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Hi Dhiren,
While Corel can export/save as to various graphics/cad formats,
I haven't seen where it can "print" (or export) M&G Codes.
Could you please give step-by-step instructions for getting the M&G
codes using corel from a simple shape like a triangle or square?
Thanks,
Jim...
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dhiren Shah" <dshah@s...>
wrote:
M&G codes? > Save the file and send it to your controller.
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Corel does not export M&G codes as part of the package. We designed a 32 bit
driver.
You design your job.
Make sure you have selected hairlines.
Click Print from the File menu.
Select our driver as your selected output device.
Save file.
It will generate F commands.
You are allowed to insert M codes of your choice at various points such as,
Job start
Starting of a shape
Ending of a shape
Ending of a job
Etc.
To test, we wrote 10 lines of text with different TrueType fonts and
different sizes and crated G-code files. It was quote a large file but a
good test.
Currently, we have tested the driver with,
Corel Draw versions 9, 10, 11, and 12.
AutoCAD version 12 and up
CadLink's EngraveLab version 6 and higher
In the next few weeks, we will be testing the driver with Dolphin PartMaster
and SolidWorks.
Dhiren Shah, Dir., Operations
Solustan, Inc.
165 Chestnut St., #200, Needham, MA 02492
PH: 781-449-7666 FAX: 781-449-7759
WWW.SOLUSTAN.COM
WWW.LINKMOTION.COM
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com]On Behalf Of jymmm
Sent: Thursday, May 05, 2005 3:47 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Hi Dhiren,
While Corel can export/save as to various graphics/cad formats,
I haven't seen where it can "print" (or export) M&G Codes.
Could you please give step-by-step instructions for getting the M&G
codes using corel from a simple shape like a triangle or square?
Thanks,
Jim...
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dhiren Shah" <dshah@s...>
wrote:
> Would it be useful for you to design your part graphically in asimple > and inexpensive program like Corel Draw and simply "Print"
M&G codes? > Save the file and send it to your controller.
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
Codesuidae
2005-05-04 09:21:20 UTC
Re: [turbocnc] Re: High-level g-code language?
Alex Holden
2005-05-04 10:55:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: [turbocnc] Re: High-level g-code language?
Codesuidae
2005-05-04 11:22:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: [turbocnc] Re: High-level g-code language?
Dhiren Shah
2005-05-04 11:38:32 UTC
RE: [CAD_CAM_EDM_DRO] Re: [turbocnc] Re: High-level g-code language?
Alan Marconett
2005-05-04 12:54:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: [turbocnc] Re: High-level g-code language?
Alex Holden
2005-05-04 13:17:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: [turbocnc] Re: High-level g-code language?
andyolney
2005-05-04 17:21:12 UTC
[turbocnc] Re: High-level g-code language?
jymmm
2005-05-05 12:46:59 UTC
[turbocnc] Re: High-level g-code language?
Dhiren Shah
2005-05-06 13:15:49 UTC
RE: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
alipavsky@i...
2005-05-06 13:33:28 UTC
RE: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Bob Muse
2005-05-06 15:02:59 UTC
Re: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Codesuidae
2005-05-08 22:24:08 UTC
Re: High-level g-code language?
washcomp
2005-05-09 06:05:13 UTC
Re: High-level g-code language?
Dhiren Shah
2005-05-09 06:51:37 UTC
RE: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Dhiren Shah
2005-05-09 06:52:02 UTC
RE: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Codesuidae
2005-05-09 06:56:16 UTC
Re: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?
Codesuidae
2005-05-09 07:37:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: High-level g-code language?
Dhiren Shah
2005-05-09 08:07:17 UTC
RE: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?