RE: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?

There are a couple of ways to do what you are asking for:

1. We provide an applet with the driver. You can set one depth for the job
with a possibility of multiple passes by declaring a maximum Z move in any
one pass.

2. The applet supports up to 10 colors. A job can be designed with vectors
in different colors.

The colors can be used to control - job feed rates or Z depths for each
color in the CNC world. (will be added soon)
The colors can be used to control - power, speed, and Q-switch frequency in
the laser world. (Power and speed already implemented)

3. Many applications including CAD/CAM products can create zigzag fill
and/or island fills for specific tool diameter. The LinkMotion driver will
treat outlines of the shapes as well as fill lines as vectors and create M&G
codes for the job on the screen.

Best regards.

Dhiren Shah, Dir., Operations
Solustan, Inc.
165 Chestnut St., #200, Needham, MA 02492
PH: 781-449-7666 FAX: 781-449-7759
WWW.SOLUSTAN.COM
WWW.LINKMOTION.COM

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com]On Behalf Of Codesuidae
Sent: Monday, May 09, 2005 9:56 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] [turbocnc] Re: High-level g-code language?

Dhiren Shah wrote:

>Not at this point. It only supports 2 1/2D.
>
>

Cool product. Out of my price range, but still cool :)

I'm curious how you go about setting the Z depth for different paths?
Also curious if it only traces the paths or if it can be configured with
tool info so it can do area fills?

cs


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links