Re: CNC on the very cheap

> > I have a dec laser printer with I think 3 motors in it and 2 cannon
> bubble jet printers I have access to a 3 foot slab of marble that I
> can use as a bed..
> >
> > My problem is how/where can I find the plans and schematics to build
> the controllers and the other stuff like I said I have no money I can
> spend on this project.
> >
> > I also have about 4 old computers I can use for parts... most are
> p100's so they are pretty out dated...


> I tried turbocnc and it won't
> run on my version of win98se ...

start-shut-down-restart in DOS mode
There is no reason it should not work. If you still have troubles,
ask on the TurboCNC group.

> the other part is is it important the number of axes I can
> build into this monster I am trying to make?
> >

> Sorry, the intended use for this cnc is for making pcb's woodcarving
> and metal work basically an all round machine.

I think the motors will be too small, but there is some hope !

build your 'first' machine with the parts you have. it will be fun,
and a learing experiance and you'll have a small unit that can help to
make parts for the bigger machine.

Even if all it can do is start a 1/16 hole in metal, you can then take
that to your drill press and put in the bigger holes in the proper
location.

Then, sell the machine on e-bay and buy the bigger motors with the $$$

Dave