CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] 2 transformers wired in parallel to double VA?

Posted by R Rogers
on 2005-06-05 05:17:53 UTC
Jon,

Sounds easy enough. Thanks for the info.

Ron

Jon Elson <elson@...> wrote:
R Rogers wrote:

>Thanks for responding Jon, Yes they are made by the same manufacturer. Hopefully the secondaries are color coded and I think they are. Not sure if thats a determining factor on phase to phase. I guess, the way to test would be, If it trips a breaker, it's backwards? Or there must be a better way to determine this?
>
>
Yes. Hook the primaries in parallel. Then, only hook TWO of the
secondary wires together, leave
the other pair apart. Measure the voltage between those other two wires
when you plug it
in. If it is just 1 or 2 volts, you can connect the wires. If it is
110 V, then the phasing is backwards.
Swap the wires on one of the transformers and repeat the test.

Jon



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links








[Non-text portions of this message have been removed]

Discussion Thread

R Rogers 2005-06-04 15:44:44 UTC 2 transformers wired in parallel to double VA? Jon Elson 2005-06-04 18:34:10 UTC Re: [CAD_CAM_EDM_DRO] 2 transformers wired in parallel to double VA? R Rogers 2005-06-04 18:49:12 UTC Re: [CAD_CAM_EDM_DRO] 2 transformers wired in parallel to double VA? Jon Elson 2005-06-04 21:44:41 UTC Re: [CAD_CAM_EDM_DRO] 2 transformers wired in parallel to double VA? R Rogers 2005-06-05 05:17:53 UTC Re: [CAD_CAM_EDM_DRO] 2 transformers wired in parallel to double VA? Roy J. Tellason 2005-06-05 12:17:24 UTC Re: [CAD_CAM_EDM_DRO] 2 transformers wired in parallel to double VA? JanRwl@A... 2005-06-05 14:33:22 UTC Re: [CAD_CAM_EDM_DRO] 2 transformers wired in parallel to double VA?