CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Rotary set-up question????

Posted by Russ Waters
on 2005-07-01 18:35:45 UTC
Hi sounds good... Have you ever thought of trying a geared down stepper, via timing belt and pulley system to a home made rotary divice? I do believe it would eliminate all backlash....

Russ

afogassa <afogassa@...> wrote:
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Russ Waters
wrote:
> Hi all, hopefully there are some of you that have experience in
adding rotary axis to a cnc milling or even a lathe system..... I
know this is asking a lot, but if you can help get me started in
hardware and software requirement, I would greatly appreciate it!
>
> I am using stepper in my mill and lathe system, MicroKinetics is
one of the controller programs I have access to....
>
> Thanks in advance,
> Russ
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> [Non-text portions of this message have been removed]

I'm using deskcnc and a rotary axis, very simple plug a step drive
and motor and there you have.
Only problem is to find a zero backlash rotary table to use.
I'm using a 40:1 gear reduction and it have about 3min. of backlash
when machining up to 1" diameter it's not a problem, but when
machining a 4" diameter than we got problems.





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links








---------------------------------
Discover Yahoo!
Stay in touch with email, IM, photo sharing & more. Check it out!

[Non-text portions of this message have been removed]

Discussion Thread

Russ Waters 2005-06-30 04:12:05 UTC Rotary set-up question???? turbulatordude 2005-06-30 07:04:05 UTC Re: Rotary set-up question???? afogassa 2005-06-30 13:56:25 UTC Re: Rotary set-up question???? Alan Marconett 2005-06-30 14:26:38 UTC RE: [CAD_CAM_EDM_DRO] Re: Rotary set-up question???? Russ Waters 2005-07-01 18:35:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Rotary set-up question???? afogassa 2005-07-01 19:47:06 UTC Re: Rotary set-up question????