Re: [CAD_CAM_EDM_DRO] Max stepper motor speed - rpm

There are several good white papers at
http://geckodrive.com/support.htbml
Also if you have the Nook industries catalog, there is information about
the "critical speed" for the screws that Thom mentioned.

Let us know if we can help further.

Regards,
JJ

On 12-Aug-2005, at 14:47, Scott Riddle wrote:

> I am looking at setting up a CNC router and I am starting to size
> components like the ball screw and its pitch along with the stepper
> motor speed and torque needed. One question I have is how to determine
> the max rpm you can get out of a specific stepper. There are basically
> 3 parts, the power supply, driver, and motor. Assume that the power
> supply is sufficient how do you calculate the max rpm capability from
> the driver? Say I start with a Gecko drive that has a freq=200kHz and
> it is a 10 micro step drive and the motor os 200 steps per rev. Would
> it be 200,000/(200*10)= 100 steps per second. Times it by 60 to get
> 6,000 RPM. So the drive is capable. Now is the motor. Would you just
> have to look at the speed torque curves and see for the desired torque
> what speed you can run at? Is there some way to determine this if you
> do not know the Mfg of the motor?
>
> My main reason for this question is that I am thinking of buying a
> stepper that puts out around 600 Oz-in torque and direct couple it to
> my .200" pitch ball screw. This would give me good speed capabilities
> when routing on wood. I am trying to avoid to have to add the extra
> complexity of a belt system.
>
> Thanks
> Scott
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> a sister site to the CCED group, as many of the same members are
> there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

---
Help everyone. If you can't do that, then at least be nice.