Re: [CAD_CAM_EDM_DRO] Motor Size /Joystick Question
Posted by
bobmcknight@c...
on 2005-08-27 16:25:29 UTC
Instead of switches, have the joystick control variable
resistors that are hooked to the 555 timing circuit. I
believe that joysticks are readily available with variable
resistors.
bob mcknight
resistors that are hooked to the 555 timing circuit. I
believe that joysticks are readily available with variable
resistors.
bob mcknight
On 27 Aug 2005 at 18:51, skerbitz wrote:
I have an project that uses bipolar stepper motors to pan and tilt a
metal table weighing about 20 to 30 pounds. The steppers are not
controlled using a PC, but by using a joystick. I know that an
oscillator circuit (555 type) can be built to run the stepper motor
drivers in 'standalone' mode, but ususally this involves using
external switches and doesn't provide variable speed control with a
joystick, which is what I want. As I move the joystick I would like
the speed to increase or decrease just as it would say in a normal PC
game.
I've spent a LOT of time searching on google and found a few
interesting things, the closest being this :
http://www.imshome.com/osc.html
which plugs into IMS's bipolar stepper motor driver.
Can anybody think of something cheaper/better ?
And now for another issue, I don't have much of a feel for how
powerful the bipolar motors need to be to pan/tilt the table. Lets say
for the sake of argument that the motors and the table were geared,
like 2 cogs on a bicycle with a chain, to provide more torque at lower
speed and that I wanted the table to be able to turn 180 degrees in
roughly 2 to 5 seconds. Noting the weight above (20 to 30 pounds)
what
would you recommend for motor size (other than bigger is better :)
Thanks,
Matt
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
skerbitz
2005-08-27 14:26:57 UTC
Motor Size /Joystick Question
caedave
2005-08-27 15:30:27 UTC
Re: [CAD_CAM_EDM_DRO] Motor Size /Joystick Question
bobmcknight@c...
2005-08-27 16:25:29 UTC
Re: [CAD_CAM_EDM_DRO] Motor Size /Joystick Question
Andrey Lipavsky
2005-08-28 16:04:00 UTC
RE: [CAD_CAM_EDM_DRO] Motor Size /Joystick Question
Bob Muse
2005-08-28 17:06:53 UTC
Re: [CAD_CAM_EDM_DRO] Motor Size /Joystick Question
andyolney
2005-08-29 12:12:04 UTC
Re: Motor Size /Joystick Question