Re: [CAD_CAM_EDM_DRO] CNC mill upgrade
Posted by
Wayne Weedon
on 2005-09-24 12:40:45 UTC
Zafar Salam wrote:
the later larger model with glassfibre covers?
SEM motors? If so these have Heidenhain resolvers which are not quite
a full encoder. I fitted a US Digital Encoder in place of these. Just
left the tacho unconnected.
Bosch Drives? I sold mine and replaced with Gecko 320's The lower
voltage was ok for me. Rutex do a higher voltage step/dir drive.
You could do something similar and use Mach3, or try to interface to the
original drives with something like the Rutex stp/dir>analogue converter.
Wayne....
--
---------------------------------------------------------------------------
Wayne M Weedon Email: wayne@...
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915
Specialists in small batch & Production Mechanical/Electrical Engineering
---------------------------------------------------------------------------
>I've got a series 1 Mk1, bought it with a fire damged control. Yours is
>I acquired an old Bridgeport Series II, Interact 2 machine last month. It is controlled by Heidenhain TNC145 which is a 2.5D controller. All three axes are driven by perm magnet dc servo motors, 3.2 NM stall torque, 145V, pulse amps 32. The machine is in excellent working condition. Any suggestions on the best way to upgrade it to full 3D control.
>
>
>
the later larger model with glassfibre covers?
SEM motors? If so these have Heidenhain resolvers which are not quite
a full encoder. I fitted a US Digital Encoder in place of these. Just
left the tacho unconnected.
Bosch Drives? I sold mine and replaced with Gecko 320's The lower
voltage was ok for me. Rutex do a higher voltage step/dir drive.
You could do something similar and use Mach3, or try to interface to the
original drives with something like the Rutex stp/dir>analogue converter.
Wayne....
--
---------------------------------------------------------------------------
Wayne M Weedon Email: wayne@...
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915
Specialists in small batch & Production Mechanical/Electrical Engineering
---------------------------------------------------------------------------
Discussion Thread
Zafar Salam
2005-09-22 21:17:39 UTC
CNC mill upgrade
Wayne Weedon
2005-09-24 12:40:45 UTC
Re: [CAD_CAM_EDM_DRO] CNC mill upgrade
Zafar Salam
2005-09-25 21:17:37 UTC
Re: [CAD_CAM_EDM_DRO] CNC mill upgrade