Re:Need help Ballscrews

--- In CAD_CAM_EDM_DRO@egroups.com, John Stevenson <john@m...> wrote:
Need to get spindle start/stop going
> >under software control with brake interlocked properly, and a
manual
> >spindle start and manual brake override. For an electronics
weenie, this
> >is hairy stuff.... However, I can work on the controls on the
side, and
> >finish off the integration when everything works right.
>
> Jon
> I run a Beaver mill, like a BP and Matchmaker 10 x 54, with Ahha
control.
> EVERTHING is controlled by the Ahha controller,
> Speed, clutches, air clamps, coolant and brake.
> Contact off list for more info. Most of this is done by macros and a
> modified Mcdmap.agc file.
> You are welcome to copies of this.
> >
Forgot this list deletes real email address

Address is :- john[at]machines.fsnet.co.uk

> Regards,
> John Stevenson
> Special Purpose Machines
> Nottingham, England