CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Any info on controlling spindle speed of 7x12 mini lathe

Posted by Paul Kelly
on 2005-10-27 16:01:51 UTC
Have a look at your motor, its probably a highish voltage DC device. The
mini lathe drives are usually provide a few hundred volts PWM.
An optio isolator from the parallel port driving the output stage of the
existing circuit with PWM from Mach3 would work and cost next to nothing.
Make absolutely sure you know what you're doing first though. That drive can
deliver several hundred watts, you wanna be sure that power doesn't end up
going into your PC or worse still, you..

PK

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of turbulatordude
Sent: Friday, 28 October 2005 3:07 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Any info on controlling spindle speed of 7x12
mini lathe

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "zarzul" <aminear@b...> wrote:
>
> I am just beginning the project of converting my minilathe to CNC, has
> anyone seen any info on the circuit diagrams for the existing spindle
> speed control, I would like to modify it so I can control speed using
> my existing motor from Mach3.
>

If you want to control the motor speed, then you have a few very
simple options. one is to use a stepper powered pot. Althugh it is
not dynamic, it offers the interface.

another way is to add a PWM output to genearate a voltage signal like
the POT would have.

Yet another way is to use the modbus output to a PIC and then have the
PIC or AVR do the real-time speed control.

Dave






Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

zarzul 2005-10-27 08:59:06 UTC Any info on controlling spindle speed of 7x12 mini lathe turbulatordude 2005-10-27 12:07:03 UTC Re: Any info on controlling spindle speed of 7x12 mini lathe Peter Homann 2005-10-27 15:52:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Any info on controlling spindle speed of 7x12 mini lathe Paul Kelly 2005-10-27 16:01:51 UTC RE: [CAD_CAM_EDM_DRO] Re: Any info on controlling spindle speed of 7x12 mini lathe