Re: [CAD_CAM_EDM_DRO] hi all i m a student for you

Shumaim,

Research here at this forum in the files section and look at all the links. Decide what type of CNC work you wish to do and the type of machine you would need then research in that direction. I would suggest Mach3 CNC software as it is probably the most user friendly and will run on a Windows system. There are alot of other good softwares as well. If you have any questions just ask.

There are typically 4 basic components to a CNC system:

PC/software - Runs the software and issues step and direction commands

Breakout board/interface - Ditributes the step and direction commands to each axis. Some systems are ran without this but it involves alot of wiring management issues.

Servo or Stepper drives- Receives low voltage step and direction commands in the form of pulses from the breakout board and issues high current step and direction commands to the servo or stepper motors.

Servo or stepper motors- Each connected to an axis that results in the actual machine motion.

Ron

shumaimshaheer <shumaimshaheer@...> wrote:
hi everyone my name is shumaim shaheer.
i am new for CNC machines.
i want to learn how CNC works, and learn from your knowledge.
please tell me from where i start to learn CNC.
i dont know even EDM,DRO i m very new.








Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









[Non-text portions of this message have been removed]