Re: Axis Stall Problems

--- In CAD_CAM_EDM_DRO@yahoogroups.com, KM6VV <KM6VV@a...> wrote:

>
> HI Wayne,
>
> Half-step should be a little better. Also consider slowing
> down the acceleration; plenty of suggested starting INIs on
> the TurboCNC list.

I'll slow the accel. down and see if that helps.
If that doesn't work, I'll give half-step a try.

> What size steppers?

Sanyo-Denki 180-oz Inch stepper motors.

<http://sanyo-denki-online.com/nema23.htm>

> Wayne C. Gramlich wrote:
>
> > All:
> >
> > My Sherline conversion is getting dangerously close to working,
> > but I'm running into some problems with axis stalling.
> >
> > Hardware:
> > I am using an old Sherline lathe as my base, with vertical
> > milling column and a 13" inch table. Standard Shereline
> > CNC mounts are being used. I have 180 oz-in Sanyo-Denki
> > bi-polar stepper motors for each axis.

[snippage]