CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Axis Stall Problems

Posted by Paul Kelly
on 2005-11-13 00:00:14 UTC
I understand what you are saying, but the measured current
does indeed average around 1 Amp.

Fair 'nuff, At what speed?


I've looked at the A2977 and there are three problems (for me):

1) 35V is on the hairy edge for 24VAC transformer.
Finding a smaller transformer is a pain.
Agreed, I'm running at about 30VAC, I'll report back when it's been making
swarf for a few months.

2) I can not find any Allegro spec. sheet that
explains how to heat sink their product. At
least with the L297, I can just buy a heat sink
that clips right on.

I clamped a CPU heatsink onto the top of the chip with 4 x 3mm bolts. Works
well.

3) Surface mount. I do not really have adequate
equipment to mount the chips.

Nah PLCC is easy, I hand solder SSOP :-)))

All good points though
Best of luck...



I'm sure they are all workable, but in the end, all I
really want is something that is easy to build and just
works. Obviously, the L298/L298 pairs meet that criteria,
but I was hoping I could get a little cheaper and a little
more flexiblilty.

-Wayne

[snippage]







Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

Wayne C. Gramlich 2005-11-12 15:52:42 UTC Axis Stall Problems Paul Kelly 2005-11-12 16:05:38 UTC RE: [CAD_CAM_EDM_DRO] Axis Stall Problems Jon Elson 2005-11-12 16:21:01 UTC Re: [CAD_CAM_EDM_DRO] Axis Stall Problems Wayne C. Gramlich 2005-11-12 16:29:06 UTC Re: Axis Stall Problems KM6VV 2005-11-12 17:05:45 UTC Re: [CAD_CAM_EDM_DRO] Axis Stall Problems Paul Kelly 2005-11-12 17:48:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Axis Stall Problems Wayne C. Gramlich 2005-11-12 23:12:40 UTC Re: Axis Stall Problems Wayne C. Gramlich 2005-11-12 23:28:37 UTC Re: Axis Stall Problems Wayne C. Gramlich 2005-11-12 23:34:11 UTC Re: Axis Stall Problems Paul Kelly 2005-11-13 00:00:14 UTC RE: [CAD_CAM_EDM_DRO] Re: Axis Stall Problems Jon Elson 2005-11-13 10:52:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Axis Stall Problems Irby Jones 2005-11-13 14:38:32 UTC Re: Axis Stall Problems Irby Jones 2005-11-13 14:47:49 UTC Re: Axis Stall Problems Wayne C. Gramlich 2005-11-13 18:14:15 UTC Re: Axis Stall Problems Paul Kelly 2005-11-13 18:31:27 UTC RE: [CAD_CAM_EDM_DRO] Re: Axis Stall Problems Jon Elson 2005-11-13 19:33:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Axis Stall Problems Wayne C. Gramlich 2005-11-13 19:38:32 UTC Re: Axis Stall Problems Jon Elson 2005-11-13 19:46:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Axis Stall Problems Wayne C. Gramlich 2005-11-13 20:53:38 UTC Re: Axis Stall Problems Irby Jones 2005-11-14 07:21:53 UTC Re: Axis Stall Problems Wayne C. Gramlich 2005-11-23 17:15:55 UTC Re: Axis Stall Problems engravingdave 2005-11-24 20:45:31 UTC Re: Axis Stall Problems Wayne C. Gramlich 2005-11-25 11:34:37 UTC Re: Axis Stall Problems