Heidenhain Encoder Wiring Help?
Posted by
Kevin R. Walsh
on 2005-12-06 22:54:28 UTC
I bought new servos to retrofit my Bridgeport Series I CNC. They are
older General Numerics (Seimens) DC servo motors. I've rebuilt them
with new bearings and cleaned them up, but I need to know how to wire
the encoders. They are Heidenhain ROD 320 encoders. Id. Nr. 209 698
01. They have 8 wires plus a shield coming from them. The wires are
pink, green, blue, brown, white, yellow, red and grey. I'll be
hooking thes up to Rutex R2020 drives. I have to assume that the 8
wires are A, not A, B, not B, Index, not Index, Power and ground, but
I have no way of knowin which is which. If I even knew which was
power and ground I could probably deduce the rest, but I don't even
know where to begin. I've tried Google for Heidenhain, etc to no
avail. Does anyone have any idea on wiring for these?
older General Numerics (Seimens) DC servo motors. I've rebuilt them
with new bearings and cleaned them up, but I need to know how to wire
the encoders. They are Heidenhain ROD 320 encoders. Id. Nr. 209 698
01. They have 8 wires plus a shield coming from them. The wires are
pink, green, blue, brown, white, yellow, red and grey. I'll be
hooking thes up to Rutex R2020 drives. I have to assume that the 8
wires are A, not A, B, not B, Index, not Index, Power and ground, but
I have no way of knowin which is which. If I even knew which was
power and ground I could probably deduce the rest, but I don't even
know where to begin. I've tried Google for Heidenhain, etc to no
avail. Does anyone have any idea on wiring for these?
Discussion Thread
Kevin R. Walsh
2005-12-06 22:54:28 UTC
Heidenhain Encoder Wiring Help?
craig strudwicke
2005-12-06 23:06:16 UTC
RE: [CAD_CAM_EDM_DRO] Heidenhain Encoder Wiring Help?
Mike J
2005-12-09 20:28:01 UTC
RE: [CAD_CAM_EDM_DRO] Heidenhain Encoder Wiring Help?
ameen ameen
2005-12-10 10:40:23 UTC
Looking 4 step + board
turbulatordude
2005-12-10 10:52:24 UTC
Re: Looking 4 step + board
Robert Campbell
2005-12-10 19:38:15 UTC
Re: [CAD_CAM_EDM_DRO] Looking 4 step + board
caudlet
2005-12-10 21:23:01 UTC
Re: Looking 4 step + board
Kevin R. Walsh
2005-12-16 22:23:32 UTC
Re: Heidenhain Encoder Wiring Help?