Re: [CAD_CAM_EDM_DRO] typical no-load speed
Posted by
Anders Wallin
on 2006-02-07 07:55:41 UTC
> Using a ballscrew with a 20mm lead and assuming no load can anyonemax pulse frequency maybe 25kHz
> give me an idea of the speeds that could expected using a combination
> of say Mach3 and a geckodrive?
nr of pulses per rev 2000 (10x microstepping)
-> 12.5rev/s * 20 mm = 250mm/s = 15m/min = 590ipm = plenty!
..but you need a pretty stiff ballscrew (and big motors!) to run it at
12.5*60= 750rpm
and the 'electrical resolution' i.e. size of one step would be 20mm/2000 =
0.01 mm which might be a little large.
Discussion Thread
Graham Stabler
2006-02-07 05:06:40 UTC
typical no-load speed
Anders Wallin
2006-02-07 07:55:41 UTC
Re: [CAD_CAM_EDM_DRO] typical no-load speed
turyga1963
2006-02-07 15:29:21 UTC
Re: typical no-load speed
Graham Stabler
2006-02-08 01:42:11 UTC
Re: typical no-load speed