A2Z QCToolposts

Tim,

I noticed that your toolposts have replaced those from TS
Engineering at Little Machine Shop, and that yours are dimessionally
similar to the TS units so that your toolholders also fit the TS
blocks.

I used to own a TS toolpost, and if I decide to get another small
lathe, I will probably try yours this time.

As both A2Z and TS are in the Denver area, can you comment on any
connection between the companies, either historic or current?

Tom


--- In CAD_CAM_EDM_DRO@yahoogroups.com, archie road <jeep_32@...>
wrote:

>
> Thanks Tim.
> I liked the video and also the equipment placement photo's as

well.

> Happy Hunting
> archie =) =) =)
> timgoldstein wrote:
>
> >Only slightly on topic, but I thought some of you might enjoy

seeing

> >a modern industial CNC machine at work. I just put a video on my
> >site showing our Haas mill cutting QCTP bodies.
> >
> >For reference, the rapids are at 1000 ipm and most of the cutting

is

> >at 60 ipm. Material is 6061 aluminum and except for the face mill
> >all tools are HSS. Blocks are 1.75x1.75x1.5" and the hole

pocketed

> >into the blocks in the closer fixture is 1" dia and 1.25" deep.
> >
> >The video is on the links page of www.A2ZCNC.com and is the top

link.

> >
> >Tim
> >A2Z CNC
> >1530 W Tufts Ave Unit B
> >Englewood CO 80110
> >
> >tim@...
> >www.A2ZCNC.com
> >
> >USA made accessories for desktop mills & lat
> >
> >
> >
> >
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@..., timg@...

> >Moderator: pentam@... indigo_red@... davemucha@...

[Moderators]

> >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if you have trouble.

> >http://www.metalworking.com/news_servers.html
> >
> >http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.

> >
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........

> >bill
> >List Mom
> >List Owner
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >.
> >
> >
> >
>