Turbo CNC aint hanging up for now....
Posted by
Marcos Leandro gonzalez Brughetti
on 2006-03-21 13:19:32 UTC
hi everybody, i wanted to thanks you all for the support. today i
purchase an extension cord with ground connector...whoala!! it seems
that TCNC works fine now...
i have tried my spindle at 5hz, 10 hz, 20, 25 and 30hz and TCNC was
flawless...!! im very happy with this simple solution.
just for reference, my motor is 2400RPM at 50hz, so
30hz is equal to 1440rpm
25hz is equal to 1200rpm
20hz is equal to 960 rpm
10hz is equal to 240 rpm
5hz is equal to 120 rpm
No noise at those hz seems to reach the computer now..!!
TNX again!
MARCOS
purchase an extension cord with ground connector...whoala!! it seems
that TCNC works fine now...
i have tried my spindle at 5hz, 10 hz, 20, 25 and 30hz and TCNC was
flawless...!! im very happy with this simple solution.
just for reference, my motor is 2400RPM at 50hz, so
30hz is equal to 1440rpm
25hz is equal to 1200rpm
20hz is equal to 960 rpm
10hz is equal to 240 rpm
5hz is equal to 120 rpm
No noise at those hz seems to reach the computer now..!!
TNX again!
MARCOS