CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] regulated power supplies???????????

Posted by Phil Mattison
on 2006-04-26 15:48:10 UTC
I think it would be more accurate to say that if you are using a chopper
type motor driver there is no NEED to regulate the power supply, because the
driver does it. The PWM motor driver is essentially a current regulator,
whereas most conventional switching power supplies are voltage regulated.
Using a voltage regulated power supply with a current regulated driver is
just overkill, but not inherently bad, so long as you have enough of a
capacitor to buffer the switching supply from the current spikes induced by
the driver's chopper. Clear as mud.
--Phil M.

----- Original Message -----
From: <wanliker@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, April 26, 2006 3:30 PM
Subject: [CAD_CAM_EDM_DRO] regulated power supplies???????????


>
> In a message dated 4/26/2006 9:56:36 AM Mountain Daylight Time,
> hwhacker@... writes:
>
> I believe the motor power supply SHOULDN'T be regulated.
>
>
>
> This confuses me a bit, as many are using the switching power supplies,
> without problems, and there outputs seem to be regulated????
>
> bill
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

wanliker@a... 2006-04-26 15:31:02 UTC regulated power supplies??????????? Phil Mattison 2006-04-26 15:48:10 UTC Re: [CAD_CAM_EDM_DRO] regulated power supplies??????????? caudlet 2006-04-26 17:57:55 UTC Re: regulated power supplies??????????? wanliker@a... 2006-04-26 21:19:55 UTC Re: [CAD_CAM_EDM_DRO] regulated power supplies???????????