RE: glass scale alignment
Posted by
Kenneth Emmert
on 2006-04-29 20:45:04 UTC
Hello,
I have a pair of ' Metric 01 MM ' glass scales and I can't get the reading
head aligned properly with the glass scale so that it will output a reliable
signal. I can move the head along the scale by hand and it seems to read
accurately but I can't find that sweet spot when I put it back on to it's
bracket. The bracket doesn't appear to be bent or loose. Would anyone know
how to set up the reader head alignment.
cheers,
Denis
I put on a set of 1um glass scales last week! Normal for many of these
scales is a gap of 0.040 to 0.060" between bottom of encoder base and top of
scale. Scale should be leveled to within 0.005" or less.
Ken
Kenneth A. Emmert
SMW Precision LLC
866-533-9016 (Toll Free)
I have a pair of ' Metric 01 MM ' glass scales and I can't get the reading
head aligned properly with the glass scale so that it will output a reliable
signal. I can move the head along the scale by hand and it seems to read
accurately but I can't find that sweet spot when I put it back on to it's
bracket. The bracket doesn't appear to be bent or loose. Would anyone know
how to set up the reader head alignment.
cheers,
Denis
I put on a set of 1um glass scales last week! Normal for many of these
scales is a gap of 0.040 to 0.060" between bottom of encoder base and top of
scale. Scale should be leveled to within 0.005" or less.
Ken
Kenneth A. Emmert
SMW Precision LLC
866-533-9016 (Toll Free)
Discussion Thread
Denis Casserly
2006-04-28 18:11:24 UTC
glass scale alignment
Jon Elson
2006-04-28 20:54:31 UTC
Re: [CAD_CAM_EDM_DRO] glass scale alignment
Denis Casserly
2006-04-29 12:27:52 UTC
Re: [CAD_CAM_EDM_DRO] glass scale alignment
Jon Elson
2006-04-29 13:23:15 UTC
Re: [CAD_CAM_EDM_DRO] glass scale alignment
Kenneth Emmert
2006-04-29 20:45:04 UTC
RE: glass scale alignment