Scanning a quarter
Posted by
Fred Smith
on 2006-06-09 07:13:49 UTC
I've been working on some probing challenges lately and having
resolved some of them I thought the group might be interested in the
result:
http://www.imsrv.com/deskcnc/quarter.jpg
This image is a screenshot of the .stl file created with the DeskCNC
machine controller and probe, opened and rendered in Vector Cad-Cam.
On the flat areas the machine is traveling at 35 ipm. The scanning
density is .004 x .004 inch, just under 100,000 points. Total scan
time about 3.5 hrs.
Here is the detailed method that I used to create the scanned file:
http://tinyurl.com/fc7za
Fred Smith - IMService
http://www.cadcamcadcam.com/hobby
resolved some of them I thought the group might be interested in the
result:
http://www.imsrv.com/deskcnc/quarter.jpg
This image is a screenshot of the .stl file created with the DeskCNC
machine controller and probe, opened and rendered in Vector Cad-Cam.
On the flat areas the machine is traveling at 35 ipm. The scanning
density is .004 x .004 inch, just under 100,000 points. Total scan
time about 3.5 hrs.
Here is the detailed method that I used to create the scanned file:
http://tinyurl.com/fc7za
Fred Smith - IMService
http://www.cadcamcadcam.com/hobby
Discussion Thread
Fred Smith
2006-06-09 07:13:49 UTC
Scanning a quarter
Jon Elson
2006-06-09 09:34:32 UTC
Re: [CAD_CAM_EDM_DRO] Scanning a quarter
R Rogers
2006-06-09 09:57:58 UTC
Re: [CAD_CAM_EDM_DRO] Scanning a quarter