Re: [CAD_CAM_EDM_DRO] Scanning a quarter

Fred Smith wrote:

>I've been working on some probing challenges lately and having
>resolved some of them I thought the group might be interested in the
>result:
>
>http://www.imsrv.com/deskcnc/quarter.jpg
>
>This image is a screenshot of the .stl file created with the DeskCNC
>machine controller and probe, opened and rendered in Vector Cad-Cam.
>On the flat areas the machine is traveling at 35 ipm. The scanning
>density is .004 x .004 inch, just under 100,000 points. Total scan
>time about 3.5 hrs.
>
>
>

Cool! Very impressive result, as coins have really shallow relief.

Jon