RE: [CAD_CAM_EDM_DRO] need motor for CNC (sherline)

This is something I might try, but I still need a motor (right now I have to
switch the motor back to the lathe when I want to use it and put it on the
mill when I need it

What I actuly have been doing is choping up my cuts into a bunch of subs and
putting a pause in the control program so I can manuely feed/lift the
milling head. The problem is I have paint twice for motors and bouth don't
work. If it weren't that the motor from the lathe does work, I'd think
there was a different problem. But if the lathe motor works, I should be
able to find a new motor that will work--Ijust don't know a damn thing about
stepper motors so I have no idea what to buy or from who (I don't want to go
back to backtrack as they don't seem inclined to work with me on this)

-----Original Message-----
From: Darrell [mailto:dgehlsen@...]
Sent: Tuesday, July 11, 2000 5:00 PM
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] need motor for CNC (sherline)


Also, if you have any backlash on Z, by counterbalancing a little heavy (so
the Z motor has to push Z down) you could eliminate the backlash.
Darrell

Addresses:
Post message: CAD_CAM_EDM_DRO@egroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
Moderator: jmelson@... [Moderator]
URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
FAQ: http://www.ktmarketing.com/faq.html
bill,
List Manager