Re: [CAD_CAM_EDM_DRO] Need Source for Large Servo Motors

KelingInc wrote:

>Daniel
>
> Check here
>
> http://www.kelinginc.net/DCBrushMotor.html
>
> John
>
>
>danieltmedlin <danieltmedlin@...> wrote:
> I need servo motors in the 14 to 30lb\in range, or would it be cheaper
>to use 1 to 2 hp PMDC motors and install US Digital encoders on then?
>
>
>

You should note that Mariss of Gecko Drives had to modify his G320 drive
to run Keling's motor
without excessive torque and velocity ripple. Gecko is not selling the
modified servo drive yet.
I don't know if they will sell a special model. In other words, there
motors were not really
made for positioning servo work.

Jon