RE: [CAD_CAM_EDM_DRO] Re: nice servos from plotter

It's a D-size plotter.

I am wondering what to do with it, but it is too cool not to use for
something.

________________________________________
Andy Wander


-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of skykotech
Sent: Friday, September 01, 2006 3:03 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: nice servos from plotter

No, I didn't have any problems with the encoder wiring. The ground
pin was easy to find as it was connected to the ground plane and
thus all the mounting screws. I guessed that power would be +5
volts, and since there was a pin with a larger trace which was
routed to several chips, I assumed that to be power. I guessed on
channel A and channel B, and of course got them wrong :-) but that
hurts nothing..just swap them.

The motor is DC and only has 2 power wires, red and black. Bog
simple!

What does the 4699A look like? Is it a A size or one of the large D
or E size?



This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex