Re: Fadal Drilling speed
Posted by
smeboss
on 2006-09-03 10:44:51 UTC
Thanks Ken
Very helpful information!
Charles
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Ken Campbell"
<deltainc@...> wrote:
Very helpful information!
Charles
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Ken Campbell"
<deltainc@...> wrote:
>holes
>
> ----- Original Message -----
> From: "smeboss" <c65pratt@...>
> > I'm wondering how fast a Fadal 4020 can drill a series of 15/16
> > thru 3/8 mild steel, rectangular patttern, 2 rows of 4, 4"centers?
>that you
> > Charles
> ******
> One advantage of controlled feed ( cnc or leade screw control ) is
> don[t slow down and work harden the steel being cut .. with hssdrill, 2
> flute, try 0.001 per flute per turn, so a 1/2 inch plunge wouldtake about
> 1/4 minute at 1000 rpm.if you a
> This is per hole, so have to add up your fast approach rates, and
> lot of these you could go to carbide tooling and about double thatrate.
>sturdy
> If high accuracy in locating the holes is important, even with a
> mill, you might want to do a center/starter drill "peck" on eachhole first
> .. this would be almost as fast as rapid traverse to each holewhile
> pecking, the peck diamter only has to be a teensy wider than theflat on the
> larger following drill point, ie the following larger drill islocated by
> the angled cutter tips, not the center flat.matter (g).
>
> Hope this helps. note the brand of the drilling machine does not
> ken campbell, deltawerkes9/1/2006
>
>
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.7/436 - Release Date:
>
Discussion Thread
smeboss
2006-09-02 14:22:31 UTC
Fadal Drilling speed
Ken Campbell
2006-09-02 14:52:02 UTC
Re: [CAD_CAM_EDM_DRO] Fadal Drilling speed
Steve Blackmore
2006-09-02 15:53:30 UTC
Re: [CAD_CAM_EDM_DRO] Fadal Drilling speed
skullworks
2006-09-02 18:35:31 UTC
Re: Fadal Drilling speed
smeboss
2006-09-03 10:42:51 UTC
Re: Fadal Drilling speed
smeboss
2006-09-03 10:44:51 UTC
Re: Fadal Drilling speed
smeboss
2006-09-03 10:45:05 UTC
Re: Fadal Drilling speed
Raymond Heckert
2006-09-03 19:42:24 UTC
Re: [CAD_CAM_EDM_DRO] Fadal Drilling speed