Re: Fadal Drilling speed
Posted by
smeboss
on 2006-09-03 10:45:05 UTC
Hi Steve
Thanks
for the information! This is very helpful!
Charles
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Steve Blackmore <steve@...>
wrote:
Thanks
for the information! This is very helpful!
Charles
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Steve Blackmore <steve@...>
wrote:
>holes
> On Sat, 02 Sep 2006 21:20:13 -0000, you wrote:
>
>
> >I'm wondering how fast a Fadal 4020 can drill a series of 15/16
> >thru 3/8 mild steel, rectangular patttern, 2 rows of 4, 4"centers?
> >about
> >I don't have any experience with these machines, but it takes me
> >30-60 seconds per hole manually.inches per
>
> Ignoring that specific machine, my feed/speed tables reckon 2
> minute at 400 rpm, using a HSS .9375 inch drill in mild steel.Power
> requirement for that is .35 HP.
>
> A CNC machine should be able to drill all 8 holes in approx 2 1/2
> minutes from start to finish.
>
> Steve Blackmore
> --
>
Discussion Thread
smeboss
2006-09-02 14:22:31 UTC
Fadal Drilling speed
Ken Campbell
2006-09-02 14:52:02 UTC
Re: [CAD_CAM_EDM_DRO] Fadal Drilling speed
Steve Blackmore
2006-09-02 15:53:30 UTC
Re: [CAD_CAM_EDM_DRO] Fadal Drilling speed
skullworks
2006-09-02 18:35:31 UTC
Re: Fadal Drilling speed
smeboss
2006-09-03 10:42:51 UTC
Re: Fadal Drilling speed
smeboss
2006-09-03 10:44:51 UTC
Re: Fadal Drilling speed
smeboss
2006-09-03 10:45:05 UTC
Re: Fadal Drilling speed
Raymond Heckert
2006-09-03 19:42:24 UTC
Re: [CAD_CAM_EDM_DRO] Fadal Drilling speed