Fall Sale of 3 axis G201 units

I am having a limited sale on my 3 axis Gecko control boxes that are
assembled and tested. The units are on sale for $100 less than the current
price. These units are assembled and tested. They have 3 G201's mounted on
a heatsink, a 25A power supply, cooling can, connectors on the back panel
for stepper motors, home and limit switches and provisions for 2 output
relays. The front panel has a lighted power switch and a engage/disengage
switch for motor outputs.Contact me off line at dmauch@... if
interested.
Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch

----- Original Message -----
From: "Jack Coats" <jack@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, October 06, 2006 8:15 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: milling circuit boards


>I found 1/8" collet works well.
>
> For hobby use, a place called drillbitcity.com sells re-sharpened
> drill bits for a reasonable price. But for commercial use I would
> personally try to go with new bits.
>
>
>
> Quoting turbulatordude <dave_mucha@...>:
>
>> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "wdavis364" <wdavis@...> wrote:
>>>
>>> Shopping around for a router, Some router have 1/4 collets and some
>>> have 1/4 collets and 1/8 collets. Not knowing much about this, what
>>> size collet will I would most likely to be using in milling circuit
>>> boards. Will 1/4 collets handle the very small size drill bits(1/32)?
>>> Thanks for any advice on this.
>>> bill
>>
>> the standard drill diameter for PCB work is 1/8" dia. Therefore, to
>> answer your quesiton, 1/8"
>>
>> You can buy drill bits on E-bay for about 50 cents each, in lots of
>> 25. Go for the guys who will tell you up-front what diameter drills
>> you will get.
>>
>> I bougth a cheap set and 45 pieces were 13 thou or less. Totally
>> unusable for my needs.
>>
>> Dave
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>