RE: [CAD_CAM_EDM_DRO] milling circuit boards

HI Ron,

I agree about the cost of having one or more boards made. I'll save that
step for later...

1/8" endmill? The tip of the cutters I use is .007", as I recall. 1/8"
won't cut it! (pun intended). What 'ya want it for? Contact me off-list if
you want.

If you want to use a 1/8" endmill, you can probably just draw something up
in a CAD program.

Alan KM6VV

> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of R Rogers
>
> Those services aren't free or even cheap compared to taking a $4 piece of
> board and milling it yourself. They usually have a 3 board minumum and by
> the time they get through with their games, it's close to $200 for one
> design. Someone who is experimenting with different designs, that could
> get expensive.
>
> Speaking of, does anyone have a small board layout that can be ran with
> like a 1/8" endmill? If so and wouldn't mind sharing it, please email to
> rogersmach@...
>
> Something in Bobcad or DXF format, doesn't matter what it is.
>
> Thanks, Ron