CAD CAM EDM DRO - Yahoo Group Archive

Re: Hysteresis Brake

on 2007-02-14 14:12:50 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, wanliker@... wrote:
>
> You might try low value resistors instead of a short, to get some
control
> over the tension it gives you. Of course different size pulleys
would do the
> same, but harder to implement.
> Just a thought
> bill
>

I'd need more braking power rather than less so I'll need to add
power. It also needs to be adjustable.

Might actually get to test it now.

Graham

Discussion Thread

erich10983@a... 2007-02-10 05:17:57 UTC Re: Hysteresis Brake David Speck 2007-02-10 07:22:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Hysteresis Brake Graham Stabler 2007-02-10 15:04:23 UTC Re: Hysteresis Brake Tony Smith 2007-02-10 23:40:39 UTC RE: [CAD_CAM_EDM_DRO] Re: Hysteresis Brake turbulatordude 2007-02-11 07:44:27 UTC Re: Hysteresis Brake Tony Smith 2007-02-11 08:04:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Hysteresis Brake Graham Stabler 2007-02-14 01:58:05 UTC Re: Hysteresis Brake wanliker@a... 2007-02-14 09:07:33 UTC Hysteresis Brake Graham Stabler 2007-02-14 14:12:50 UTC Re: Hysteresis Brake