CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Ball-screws

Posted by James Owens
on 2000-07-21 15:52:18 UTC
Hi Carlos,

Thank you for your input.

The prices quoted by McMaster-Carr are for the cut lengths which will go in
the middle of a suitcase. It would be a very determined baggage handler that
could bend 34" of 1" diameter hardened steel bar. The only thing that
worries me is the X-ray machine. Customs may think it is a gun barrel. A
definite no no in this country.

I'll send Thomson another email and see if they reply this time. If they can
match the price plus 50% I'll get the higher spec screws.

Regards,

Terry

Discussion Thread

James Owens 2000-07-20 18:00:01 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws Jon Elson 2000-07-20 23:45:14 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws john@m... 2000-07-21 00:31:25 UTC Re: Ball-screws James Owens 2000-07-21 09:26:54 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws Jon Elson 2000-07-21 10:45:53 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws David Howland 2000-07-21 11:42:39 UTC Emco Compact 8 Left hand threads James Owens 2000-07-21 11:48:18 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws Paul Corner 2000-07-21 11:57:20 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws Darrell 2000-07-21 11:58:54 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws Kevin P. Martin 2000-07-21 12:41:58 UTC RE: [CAD_CAM_EDM_DRO] Ball-screws Carlos Guillermo 2000-07-21 13:32:09 UTC RE: [CAD_CAM_EDM_DRO] Ball-screws Spehro Pefhany 2000-07-21 13:49:26 UTC Repeatability of microswitches Jon Elson 2000-07-21 14:44:07 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws James Owens 2000-07-21 15:52:18 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws James Owens 2000-07-22 07:36:37 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws Jon Elson 2000-07-22 10:50:59 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws Alan Marconett KM6VV 2000-07-22 12:00:28 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws dave engvall 2000-07-23 08:40:47 UTC Re: Repeatability of microswitches Alan Marconett KM6VV 2000-07-31 23:34:53 UTC Re: [CAD_CAM_EDM_DRO] Ball-screws