Need Help for Mach3 Turn Setting to Stepper Motors
Posted by
Zahid Liaqat
on 2007-03-18 07:48:53 UTC
Dear's
I hv bought a breakout board from CNC4PC to activate my Lathe. I
connected the breakout board through DB25 male to male connector and
power up the board. The spindle and coolent ON/OFF works correctly, i
mean its led works when i click the spindle On/Off Button in software.
When i click the -x jog botton in mach3turn the step led and
direction led becomes on and continously on till then i do not click
the +x jog botton. when i click the +x jog button only direction led
becomes off but the step led become on till it powered off.
The same situation is with z axis motor.
Can someone help me in this situation.
I think it is Mach3 software setting problem that do not creat pulse
in steps form it only make the terminals On / Off.
I shell be very thankfull for this great help.
Best Regards.
ZAHID
I hv bought a breakout board from CNC4PC to activate my Lathe. I
connected the breakout board through DB25 male to male connector and
power up the board. The spindle and coolent ON/OFF works correctly, i
mean its led works when i click the spindle On/Off Button in software.
When i click the -x jog botton in mach3turn the step led and
direction led becomes on and continously on till then i do not click
the +x jog botton. when i click the +x jog button only direction led
becomes off but the step led become on till it powered off.
The same situation is with z axis motor.
Can someone help me in this situation.
I think it is Mach3 software setting problem that do not creat pulse
in steps form it only make the terminals On / Off.
I shell be very thankfull for this great help.
Best Regards.
ZAHID
Discussion Thread
Zahid Liaqat
2007-03-18 07:48:53 UTC
Need Help for Mach3 Turn Setting to Stepper Motors
Babar
2007-03-18 23:00:08 UTC
Re: [CAD_CAM_EDM_DRO] Need Help for Mach3 Turn Setting to Stepper Motors