Re: [CAD_CAM_EDM_DRO] Need Help for Mach3 Turn Setting to Stepper Motors

Please check the out put pins sets in the config>ports
and pins> motor outputs. Verfy if the selcted pins are
same as your breakout board.

Also check the pulses/rev in config>motor tuning, may
be the pulses /rev are too high.

Regards

Babar



--- Zahid Liaqat <miassint@...> wrote:

> Dear's
>
> I hv bought a breakout board from CNC4PC to activate
> my Lathe. I
> connected the breakout board through DB25 male to
> male connector and
> power up the board. The spindle and coolent ON/OFF
> works correctly, i
> mean its led works when i click the spindle On/Off
> Button in software.
>
> When i click the -x jog botton in mach3turn the step
> led and
> direction led becomes on and continously on till
> then i do not click
> the +x jog botton. when i click the +x jog button
> only direction led
> becomes off but the step led become on till it
> powered off.
>
> The same situation is with z axis motor.
>
> Can someone help me in this situation.
>
> I think it is Mach3 software setting problem that do
> not creat pulse
> in steps form it only make the terminals On / Off.
>
> I shell be very thankfull for this great help.
>
> Best Regards.
>
> ZAHID
>
>

____________________________________________________________________________________
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php