Re: [CAD_CAM_EDM_DRO] Re: spindle start and stop

My previous post:

>
> .... some parallel ports may not source enough current to drive the relay.

If

> you have this problem the easiest solution is to get a different parallel
> port card. It's not likely a problem.
>

Terry;
I just wired up the 2A SSR's I have here. They only draw 2.0 milliamps at
4V and 2.8ma at 5V.
You will not have any problems. The wimpiest parallel port can easily
provide this.

Good luck;
Doug