Re: Pixie error connection

Graham,

The servo does trigger an error, but the Pixie is an interface board
to change the step and dir coming from the Sound Logic break-out board
to +/- 10v. The yaskawa servos need this analog signal. The problem
is that the Pixie boards can error on their own independent of the
servo amps so they need to be able to shut down by estop when this
happens.

Keith

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Graham Stabler" <grezmos@...>
wrote:

>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Mark Vaughan" <mark@> wrote:
> >
> > Hi Graham
> >
> > It's for his Estop to trigger it upon a servo position error
> >
> > Regs Mark
> >
> >
>
> Doesn't the servo error trigger an estop?
>