maxnc ver 10

I have a motion group controller retro fit on a knee mill. I am
trying to cut a pocket in aluminum and for each pass in in depth It
move all the way up to the Z start height. at the slow plunge feed
rahter than rapid up then plunge down. it is about an 1.5" in depth
for example by the time it gets to say 7/8" in depth the cutter moves
up to .100 above 7/8" then all the way back down (at the slow plunge
feed) to the next cut depth. It was supposed to just move up .100
then rapid to the start p[oint then feed down to .125" and resume
cutting? I created the program with Millwrite 2000 and am driving the
machine with maxnc version 10 on the motion group[ controller. the
file is below.
Thanks
Clint

O1111;PUT YOUR PROGRAM NUMBER HERE
G80G40G17
M06T1
G90
G0Z0.1
M03S5000F9.0
M08
G0X0.15Y1.5388
G0Z0.1
G1Z-0.1198F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5946
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5946I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-0.2396F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5946
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5946I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-0.3594F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5946
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5946I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-0.4792F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5946
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5946I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-0.599F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-0.7188F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-0.8385F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-0.9583F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-1.0781F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-1.1979F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-1.3177F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.15
G1Z-1.4375F2.2
G1Y0.746F9.
G3X0.246Y0.65I0.096J0.
G1X0.254
G3X0.35Y0.746I0.J0.096
G1Y2.379
G3X0.254Y2.475I-0.096J0.
G1X0.246
G3X0.15Y2.379I0.J-0.096
G1Y1.7054
G1X-0.05Y1.3721
G1Y0.5304
G3X0.0304Y0.45I0.0805J0.
G1X0.4696
G3X0.55Y0.5304I0.J0.0805
G1Y2.5945
G3X0.4696Y2.675I-0.0805J0.
G1X0.0304
G3X-0.05Y2.5945I0.J-0.0805
G1Y1.7054
G1X-0.25Y1.5388
G1Y0.25
G1X0.75Y0.25
G1Y2.875
G1X-0.25
G1Y1.5388
G0Z0.1
G0X0.0Y0.0
M30