RE: [CAD_CAM_EDM_DRO] Wood working Question !!

Thank you for the info Leslie!!

leslie watts <leswatts@...> escribió: Maxi,

Just from experience with 1 hp you can cut MDF at about 2-3 meters/min.
The forces will be low, about 50 newtons.

Leslie M.Watts
L M Watts Furniture
Tiger Georgia
(706) 212-0242

Main page:
http://www.lmwatts.com
Engineering:
http://www.lmwatts.com/shop.html
Cnc surplus for sale:
http://www.lmwatts.com/forsale.html
Carved signs:
http://www.lmwatts.com/signwp.html

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com]On Behalf Of Maxi Bertotto
Sent: Friday, March 07, 2008 9:36 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Wood working Question !!

Hi!!!
Somebody know how could I calculate the cut forces for wood working (MDF)??.
I will use a 1HP spindle, feed of 12000mm/Min, 10mm diameter tool and 5mm
depth with ball screw of 5mm/turn. May be somebody can tell me how many
aprox. torque I need for the steppers...
Thankyou!!!
Maxi

---------------------------------

Yahoo! Encuentros
Ahora encontrar pareja es mucho más fácil, probá el nuevo Yahoo! Encuentros.
Visitá http://yahoo.cupidovirtual.com/servlet/NewRegistration

[Non-text portions of this message have been removed]






---------------------------------

Yahoo! Encuentros
Ahora encontrar pareja es mucho más fácil, probá el nuevo Yahoo! Encuentros.
Visitá http://yahoo.cupidovirtual.com/servlet/NewRegistration

[Non-text portions of this message have been removed]